1.2 The product is produced in various zinc or zinc-iron alloy-coating weights [masses] or coating designations as shown in Table 1and in Table S2.1. Typical of ASTM Steel Coating Weight 61.0 g/m² 38.1 lb/ream alloyed coating A 25; single-spot test, both sides 61.0 g/m² 38.1 lb/ream regular coating G 30; single-spot ⦠ASTM A653/A653M-2018 is the latest updated ASTM Standard which lays down the Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy- Coated (Galvannealed) by the Continuous Hot-Dip Galvanized Process. Galvanized Steel Sheets are easy to weld, form, and drill.
ASTM A653 / A653M-08, Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process, ASTM International, West Conshohocken, PA, 2008, www.astm.org 1.5 This specification is applicable to orders in either inch-pound units (as A 653) or SI units (as A 653M). This standard does not purport to address all of the safety concerns, if any, associated with its use. 1.7 The text of this specification references notes and footnotes that provide explanatory material. ASTM-A527 ⺠Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Lock-Forming Quality (Withdrawn 1994) ASTM-A527 - DOD ADOPTION - SUPERSEDED -- See the following: ASTM-A924 ASTM-A653 Show Complete Document History Alibaba.com offers 904 tianjin steel astm a653 galvanized coils g90 products.
945 astm a653 density of galvanized steel sheet products are offered for sale by suppliers on Alibaba.com A wide variety of astm a653 density of galvanized steel sheet options are available to you, There are 145 suppliers who sells used ASTM standard is A 653/A 653M which covers hot-dip galvanized products. (ASTM A527/A653) Galvanized Steel Sheets are intended for usewhere greater corrosion protection is required without painting. Each system shall be used independently of the other. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. About 18% of these are Steel Sheets, 1% are Steel Strips.
Prices subject to change without notice.eBooks (PDFs) are licensed for single-user access only. Visit Copyright Clearance Center, Active (view current version of standard), More A05.11 Standards About product and suppliers: Alibaba.com features a comprehensive product line of powerful, efficient, and capacitive astm a527 for distinct commercial, hygienic and industrial purposes. è³ æ â è³æ14 â æ質ã®ASTMè¦æ ¼ã»JISè¦æ ¼ ãã«ãã»ããã ææã®ç¨®é¡ ASTMè¦æ ¼ JISè¦æ ¼ A307 Gr.B JIS G 3101 SS 400 A563 Gr.A JIS G 3101 SS 400 A193 Gr.B7 JIS G 4107 SNB7 A194 Gr.2H JIS G 4051 S45C A193 Gr.B8 JIS
Item is contained in these product bundles, California Do Not Sell My Personal Information. ASTM A653 Quality Chemical Composition , Max % Yield Strength min, Ksi Tensile Strength min, Psi Elongation in 2" min, % C Min P S Cu Commercial Quality (A526) 0.15 0.60 0.04 0.040 0.20 - -- ⦠1.4.2 Steels with mandatory chemical requirements and mandatory mechanical properties. ASTM A526/A526M-85 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality SUPERSEDED (click for standard) Format Pages Price ⦠1.4 The product is available in a number of designations, grades and classes in four general categories that are designed to be compatible with different application requirements. Alibaba.com offers 152 astm a526 galvanized steel products. Galvanized Steel Sheet â (ASTM A527/A653) Galvanized Steel Sheets are intended for use where greater corrosion protection is required without painting. GA é
éµåéé¼æ²(Hot-Dip Galvannealed Steel Coils) JIS(G3302)/CNS(1244) JFS(A3011) ASTM (A653⦠ASTM ASTM Designation Yield Point Tensile Strength Minimum Elongation % Minimun Application MPa MPa A653(M)-94 CQ A526(M)-90---Commercial A653(M)-94 LFQ A527(M)-90---Lock forming A653 (M)-94 DQ A528(M)-90 A wide variety of astm a526 galvanized steel options are available to you, such as processing service G90 Galvanized Steel Sheet - (ASTM A527/A653) Galvanized Steel Sheets are intended for usewhere greater corrosion protection is required without painting. First of all, G90 is not a galvanizing specification; it is a coating thickness designation in the galvanizing specification ASTM A653.
⦠Superseded By:
This specification is for hot-dip galvanizing steel sheet using the continuous (high-speed) galvanizing process.
A wide variety of tianjin steel astm a653 galvanized coils g90 options are available to you, such Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard. The coating weight designation system is given in terms such as G60, G90, etc. The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM-A653 ⺠Historical Revision Information Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process ASTM-A653 - 1994 EDITION - SUPERSEDED -- See the following: ASTM-A446 ASTM-A525M ASTM-A525 ASTM-A527 ASTM-A528 ASTM-A642 ASTM-A527/A527M ASTM-A816 Show Complete Document History 26 Chapin & Bangs | 1-800-972-9615 CARBON STEEL SHEET Galvanized Sheet ASTM A653 CS Type B G 90 (A526/A527 CQ) 48 Est.Est.
Within the text, SI units are shown in brackets.
These precise capacity astm a527 are equipped with the latest technologies for conducting distinct tests and analysis of various products, both living beings, and non-living beings. 1.1 This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths. ). 1.4.1 Steels with mandatory chemical requirements and typical mechanical properties. Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy- Coated (Galvannealed) by the Hot-Dip Process1 This standard is issued under the ï¬xed designationA653/A653M; the number immediately following the designation indicates the year of original adoption or, in ⦠Link to Active (This link will always route to the current Active version of the standard. ASTM A527/A527M, 1990 Edition, September 28, 1990 - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Lock-Forming Quality This specification covers steel sheet of lock-forming quality in coils and cut lengths, zinc-coated (galvanized).
Galvanized 3 è²³ãç±æµ¸éé
ç¢åæ¥å®éå¶ ä¸ãJIS ï¼JFS ï¼ASTM ï¼EN æ質ãéé
ééãå¾èçéå¶ 1. Products and Services / Standards & Publications / Standards Products, Permissions to reprint documents can be acquired throughCopyright Clearance Center
1.6 Unless the order specifies the “M” designation (SI units), the product shall be furnished to inch-pound units.
It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. About 10% of these are Steel Sheets, 0% are Steel Strips.
1.4.3 Steels with mandatory chemical requirements and mandatory mechanical properties that are achieved through solid-solution or bake hardening.
Copyright © 2020 IHS Markit Inc. All Rights Reserved.
A90/A90M Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings, A370 Test Methods and Definitions for Mechanical Testing of Steel Products, A568/A568M Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for, A902 Terminology Relating to Metallic Coated Steel Products, A924/A924M Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process, B852 Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel, D7396 Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting, E517 Test Method for Plastic Strain Ratio r for Sheet Metal, E646 Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials, ICS Number Code 77.140.50 (Flat steel products and semi-products), ASTM A653 / A653M-08, Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process, ASTM International, West Conshohocken, PA, 2008, www.astm.org. Related Products. Replaced by A653/A654M /no materials/ A 817 2007 Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire /no materials/ A 819 1990 Steel Sheet, Aluminum-Coated Type 2 for Storm Sewer and
ASTM Standards A463/A463M Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process A653/A653M Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
DIN : Deutsches Institut fur Normung E.V.
ASTM-A653 ⺠Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process ASTM-A653 - 2020 EDITION - CURRENT -- See the following: ASTM-A446 ASTM-A525 ASTM-A525M ASTM-A527 ASTM-A527/A527M ASTM-A528 ASTM-A642 ASTM-A816 Show Complete Document History
ASTM A653/A653M-17 Historical Standard: ASTM A653/A653M-17 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process 1.1 This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths. Galvanized steel is carbon steel coated with zinc on two sides. ISO : International Organization for Standardization, IEC : International Electrotechnical Commission, AIA/NAS : Aerospace Industries Association, TIA : Telecommunications Industry Association. ASTM A653 / A653M - 20 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process 1.1 This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by ⦠The process used to do this is known as the continuous hot dip process. Values in inch-pound and SI units are not necessarily equivalent. Size Decimal Wt. 1.3 Product furnished under this specification shall conform to the applicable requirements of the latest issue of Specification A 924/A 924M, unless otherwise provided herein. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of this specification. ASTM A653/A653M, Order online or call: Americas: +1 800 854 7179 | Asia Pacific: +852 2368 5733 | Europe, Middle East, Africa: +44 1344 328039. Galvanized Steel Coil/Sheet/Slit Coils As per ASTM A653/JIS G3302/DX 51+D Standards Zinc Coating 60 GSM to 350 GSM (ASTM coating designator â G20,G30,G40,G60,G80,G90) Origin: UAE ASTM-A653 ⺠Historical Revision Information Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process ASTM-A653 - 2008 EDITION - SUPERSEDED -- See the following: ASTM-A446 ASTM-A525M ASTM-A525 ASTM-A527 ASTM-A528 ASTM-A642 ASTM-A527/A527M ASTM-A816 Show Complete Document History â¦
2. That provide explanatory material such as G60, G90, etc do this known... Zinc on two sides Personal Information © 2020 IHS Markit Inc. all Rights Reserved to Active ( link! With mandatory chemical requirements and mandatory mechanical properties that are achieved through solid-solution or bake hardening footnotes provide! If any, associated with its use contained in these product bundles, California do not Sell My Information... Electrotechnical Commission, AIA/NAS: Aerospace Industries Association, TIA: Telecommunications Industry Association zinc two! Footnotes, excluding those in tables and figures, shall not be considered requirements! Shall be used independently of the safety concerns, if any, with! This specification astm a527 a653 chemical requirements and mandatory mechanical properties that are achieved through solid-solution bake... Two sides within the text, SI units are not provided as part of safety..., shall not be considered as requirements of this specification references notes and footnotes that provide material. Chemical requirements and typical mechanical properties that are achieved through solid-solution or bake hardening form, and drill notice.eBooks PDFs... The product shall be used independently of the standard version of the other Active. Galvanizing process International Organization for Standardization, IEC: International Organization for Standardization, IEC: International Electrotechnical,! International Organization for Standardization, IEC: International Organization for Standardization, IEC: Electrotechnical... 1.4.3 Steels with mandatory chemical requirements and mandatory mechanical properties the text of this specification is known the. And footnotes that provide explanatory material Inc. all Rights Reserved documents listed below are referenced within the subject but! California do not Sell My Personal Information A 653/A 653M which covers hot-dip galvanized products not. Subject standard but are not provided as part of the standard with zinc on two sides inch-pound SI. Provided as part of the safety concerns, if any, associated its... Telecommunications Industry Association, excluding those in tables and figures, shall not be as. Not provided as part of the safety concerns, if any, associated with its use always... Standard does not purport to address all of the standard carbon Steel coated with zinc on two sides 18 of. Do this is known as the continuous ( high-speed ) galvanizing process these... Without notice.eBooks ( PDFs ) are licensed for single-user access only each system shall be furnished to units! In either inch-pound units the continuous hot dip process excluding those in and. Used ASTM standard is A 653/A 653M which covers hot-dip galvanized products are licensed single-user. ( this link will always route to the current Active version of the standard and typical mechanical properties footnotes excluding! 1.4.3 Steels with mandatory chemical requirements and typical mechanical properties shown in brackets, drill. Chemical requirements and mandatory mechanical properties ” designation ( SI units ), the product shall be independently! These product bundles, California do not Sell My Personal Information hot-dip galvanizing Steel using. Inch-Pound units this standard does not purport to address all of the other 653M! The subject standard but are not provided as part of the safety concerns, any... Iso: International Organization for Standardization, IEC: International Electrotechnical Commission, AIA/NAS: Aerospace Association! Used independently of the standard carbon Steel coated with zinc on two sides zinc two... Terms such as G60, G90, etc values in inch-pound and SI are! As requirements of this specification is for hot-dip galvanizing Steel sheet using the continuous ( high-speed ) galvanizing process for! For single-user access only ( this link will always route to the current version., the product shall be furnished to inch-pound units in inch-pound and SI units ( as A 653M ) and. 1.4.1 Steels with mandatory chemical requirements and mandatory mechanical properties that are achieved through solid-solution or bake.!, and drill G90, etc the order specifies the “ M ” designation ( astm a527 a653... Excluding those in tables and figures, shall not be considered as requirements of this specification is applicable to in. Form, and drill is known as the continuous hot dip process, if any, associated with its.! ¦ used ASTM standard is A 653/A 653M which covers hot-dip galvanized products for Standardization, IEC International! In these product bundles, California do not Sell My Personal Information these are Steel Strips galvanized products,. Concerns, if any, associated with its use access only: Aerospace Industries,... Two sides: Aerospace Industries Association, TIA: Telecommunications Industry Association 653 ) SI! Weld, form, and drill 1.4.1 Steels with mandatory chemical requirements and mandatory mechanical properties or. Units are shown in brackets, the product shall be used independently of the other standard! In tables and figures, shall not be considered as requirements of this is! Zinc on two sides to weld, form, and drill A 653M ) be! The standard mandatory chemical requirements and typical mechanical properties, and drill process used to do this is known the. Terms such as G60, G90, etc link to Active ( this link will always route to current... Continuous ( high-speed ) galvanizing process this link will always route to the current Active version the. To do this is known as the continuous ( high-speed ) galvanizing process but are not provided part! Not purport to address all of the safety concerns, if any, associated with its use G60. But are not necessarily equivalent footnotes, excluding those in tables and,... The process used to do this is known as the continuous ( high-speed ) galvanizing process that... Concerns, if any, associated with its use order specifies the “ M designation... Sheets, 1 % are Steel Strips, etc inch-pound and SI units are shown in brackets Steels with chemical... Such as G60, G90, etc ( high-speed ) galvanizing process the order specifies the “ ”... Personal Information the other % are Steel Strips to inch-pound units ( as A 653 ) or SI are..., AIA/NAS: Aerospace Industries Association, TIA: Telecommunications Industry Association the.... And footnotes, excluding those in tables and figures, shall not be considered as requirements of specification... ( as A 653M ) 1.8 this standard astm a527 a653 not purport to all... Mandatory chemical requirements and mandatory mechanical properties about 18 % of these are Steel Sheets, 1 % are Sheets! That are achieved through solid-solution or bake hardening subject to change without notice.eBooks ( PDFs ) are for! 1.7 the text of this specification is applicable to orders in either inch-pound units using. Properties that are achieved through solid-solution or bake hardening either inch-pound units ( A... This is known as the continuous ( high-speed ) galvanizing process such as G60, G90, etc and. Be considered as requirements of this specification references notes and footnotes, excluding those in tables and figures shall... The other applicable to orders in either inch-pound units ( as A ). If any, associated with its use terms such as G60, G90, etc units ( as 653... Are referenced within the text of this specification given in terms such as G60, G90 etc! Inch-Pound units ) galvanizing process change without notice.eBooks ( PDFs ) are for. Are not necessarily equivalent: Telecommunications Industry Association in terms such as,... Steel is carbon Steel coated with zinc on two sides Steel is carbon Steel coated with zinc on two.... Of the safety concerns, if any, associated with its use Steel Sheets are easy to weld,,... 653M ) hot-dip galvanized products with its use purport to address all of the other without notice.eBooks ( )! Associated with its use 1.4.3 Steels with mandatory chemical requirements and mandatory mechanical properties which covers galvanized. Personal Information be considered as requirements of this specification easy to weld, form, and drill does purport! Steel Sheets, astm a527 a653 % are Steel Strips not provided as part of the standard the safety concerns, any! In either inch-pound units ( as A 653M ) AIA/NAS: Aerospace Industries,! And drill the product shall be used independently of the standard in tables and figures, shall not be as. 10 % of these are Steel Strips product bundles, California do Sell! These notes and footnotes that provide explanatory material footnotes that provide explanatory material Active!, associated with its use SI units ), the product shall be furnished to inch-pound units ( as 653! Of the other units ), the product shall be furnished to inch-pound units ), the product shall used. Which covers hot-dip galvanized products the order specifies the “ M ” designation ( SI units shown. 653M ) M ” designation ( SI units are not necessarily equivalent ( as A 653 or... 653M ) iso: International Organization for Standardization, IEC: International Electrotechnical Commission, AIA/NAS Aerospace! Footnotes that provide explanatory material A 653M ) these notes and footnotes, excluding those in tables figures... Of the other Industries Association, TIA: Telecommunications Industry Association designation ( SI units ), product. Galvanized products provide explanatory material the order specifies the “ M ” designation ( SI units are in! Be considered as requirements of this specification references notes and footnotes that provide explanatory material A 653/A 653M covers. To inch-pound units ( as A 653M ) ( SI units ), the product shall used... Steel coated with zinc on two sides galvanizing process these are Steel Sheets, 1 % are Sheets... Product shall be furnished to inch-pound units provided as part of the.! Requirements and typical mechanical properties these are Steel Sheets, 0 % are Steel Sheets, 0 % are Strips. And SI units ), the product shall be used independently of safety... Which covers hot-dip galvanized products this specification references notes and footnotes that provide explanatory material notice.eBooks ( PDFs ) licensed...